Global Water WL16U-030-025 Level Logger 0-30' Range, 25' Cable

  • Rp.0

  • Availability:Pre-Order
  • Brand: Global Water
  • Product Code: ARC025


Tags: Level Logger


The WL16, Water Level Logger, is a datalogger and submersible pressure transducer combination designed for remote monitoring and recording of water level or pressure data.  The water level logger can record over 81,000 readings and has four unique recording options, fast (10 samples per second), programmable interval (1 second to multiple years), logarithmic, and exception.  Multiple depth ranges are available from 3 to 500 feet of water level change.  A 25 ft vented cable is standard on all water level loggers, and optional cable lengths are available from the factory up to 2000 ft.

The WL16, Water Level Logger, is housed in a weather-resistant cylindrical enclosure, which slips inside a standard 2-inch PVC pipe.  The Water Level Recorders are easily adapted with standard hardware for wellhead mounting, stream, or other installations.  Two internal 9 VDC Alkaline batteries will typically power each of the Water Level Loggers for approximately one year even if one of the batteries fails.  A third onboard lithium battery ensures your data is safe in the event both 9V batteries fail.  All Water Level Loggers include Windows, allowing easy upload of data to a laptop, or desktop for transfer to spreadsheet programs. 

The WL16, Water Level Logger's vented submersible pressure transducer is fully encapsulated with marinegrade epoxy.  The electronics are encapsulated so that moisture can never leak in through O-ring seals or work its way into the vent tube and cause drift or sensor failure, as is the case with many other vented sensors.  The vent tube is sealed directly to the wet-wet sensing element, and any moisture that may enter the vent tube from the housing will only contact the ceramic parts, not the electronics.  Most federal agencies, universities, and environmental consultants recommend vented water level sensors for the best monitoring results.


The vented submersible pressure transducer uses a unique silicon diaphragm to interface between your water and the sensing element.  The diaphragm is highly flexible and touches the sensing element, producing a sensor with exceptional linearity and very low hysteresis.  A stainless steel micro-screen cap protects the pressure transducer diaphragm.  The micro-screen cap has hundreds of openings, making fouling the sensor with silt, mud or sludge virtually impossible


Water Level Loggers Applications

Groundwater Monitoring, stream and river gauging, Lake/Pond Level Analysis, Flood Level Recording, Irrigation Canals, inflow and infiltration studies, Wetland/Estuary Monitoring, Weirs and Flumes, Wave and Tidal Analysis, and MUCH MORE...  NOTE: Polyurethane cable is not recommended for use with hydrocarbons or high concentrations of chlorine.  Please look at the WL450 Water Level Transmitter to meet the requirements of these types of applications.


WL16 Water Level Data Loggers

Power:  Two 9VDC Alkaline Batteries

Battery Life:  Up to 1 year (depending on recording intervals)

Resolution:  12 bit

Moisture Protection:  Protective coating (helps prevent damage to electronics from condensation)

Temperature:  -40° to +185°F (-40° to +85°C)

Humidity:  0-95% non-condensing

Memory:  Non-volatile flash memory

Storage Capacity:  81,759 time and date stamped data points (including battery voltage)

Sample Modes:  High Speed (10 samples per second), Fixed Interval (Programmable from 1 sec to >1 year), Logarithmic, Exception

Data Overwrite:  Select memory wrap or unwrap (unwrap will stop logging data once memory is full)

Clock:  Synchronizes to the time and date of user's computer

Clock Accuracy:  0.0025% or 1 minute in 1 month

Clock Format:  Month/Day/Year Hour/Minute/Second

Enclosure:  1-7/8 inch dia. x 11-1/2 inch length (4.8 cm dia. x 29.2 cm length) (fits inside a 2 inch well), stainless steel UV protected PVC vented for barometric pressure compensation

Weight:  1.6 lbs (0.7 kg) (with battery and 25 ft cable)

Communication Port:  

     WL16U: USB Type B

     Selectable Baud Rates:

     9600,19200,28800,38400,57600,115200

Certificates:  CE compliant

Global Water Level Loggers Software

Compatiblity:  Microsoft's Windows 98, ME, 2000, NT, XP, Vista, and 7

Features:  

     Tabular Display/Printout; data in standard spreadsheet format (CSV)

     Programmable alarm start and stop times

     Field calibration software and help files included

Water Level Logger Vented Cable

Conductors:  4 each 22 AWG

Material:  Marine grade polyether jacket, polyethylene vent tube, full foil shield

Shield:  Aluminum Mylar

Outside Diameter:  0.306 inch (0.78 cm)

Temperature Range:  -22° to +185°F (-30° to +85°C)

Length:  Standard 25 ft (7.62 m) (up to 2000 ft (609.6 m) from factory) (for cable lengths over 500 ft (152.4 m) please call for availability)

Submersible Pressure Transducer

Sensor Element:  Silicone Diaphragm, Wet/Wet Transducer

Water Level Measuring Range:  0-3, 15, 30, 60, 120, 250, 500 ft

Linearity and Hysteresis:  ±0.1% FS

Warm-Up Time:  3 seconds recommended

Overpressure:  Not to exceed 2 x full scale range

Accuracy:  ±0.1% of full scale at constant temperature, ±0.2% over 35°F to 70°F (1.37° to 21.1°C) range

Compensation:  Uses dynamic temperature compensation 30 to 70°F (-1.1 to 21.1°C). Automatic barometric pressure compensation

Housing:  Up to 13/16" diameter x 5-1/2" long (2 cm dia. x 14 cm long)(small enough for a 1" well)

Material:  304L Stainless Steel, SS microscreen (hundreds of holes to prevent fouling), electronics are fully encapsulated in marine grade epoxy, guaranteed not to leak

Write a review

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha