Druck PV411A-104S-HP-1-13-G Pneumatic and Hydraulic Test Kit 300 psi 20 bar kit with BSP fittings and PV411 Test Pump (Gauge Model)

  • Rp.68,000,000

  • Availability:Pre-Order
  • Brand: Druck
  • Product Code: PV411A-104S-HP-1-13-G

Tags: Pneumatic and Hydraulic Pump Test Kit

Druck PV411A - Pressure and Vacuum Hand Pump

The Druck PV411A Four-In-One Hand Pump is the ideal field tool for applying test and calibration pressures to sensors, gauges, switches, indicators and recorders. The GE Druck PV-411 A is also a low cost pressure source for workshops and laboratories. This wide capability removes the need to carry several hand pumps. Vacuum Applying vacuum to absolute, negative gauge and differential field instruments is no longer a problem. With just a few strokes, the Druck PV 411A generates up to 95% vacuum (-950 mbar at 1000 mbar ambient).

The Druck PV 411A is a high quality, field proven pressure and vacuum hand pump providing functionality, which has never been seen before in a hand held pressure source. This remarkable product replaces four conventional hand pumps and offers the following additional features:

The GE Druck PV 411A is a high quality, field proven pressure and vacuum hand pump providing functionality, which has never been seen before in a hand held pressure source. This remarkable product replaces four conventional hand pumps and offers the following additional features:


  • Pressure/Vacuum selector valve also provides exceptional fine control pressure relief in both pneumatic and hydraulic modes
  • Tamper proof adjustable overpressure protection valve which can be set to relieve pressures from 300 to 10,000 psi
  • Removable hydraulic reservoir which can be disconnected from the pump without draining the fluid
  • Reservoir safety feature with spring loaded top cover vents if inadvertently pressurized above 8 psi
  • Hydraulic mode designed to operate with distilled water and/or high viscosity mineral oil
  • Highly sensitive volume adjuster is used for hydraulic, pneumatic, vacuum and low pressure operation
  • Built-in stroke adjuster controls the pressure/vacuum generated per stroke
  • 240° swivel head for optimum viewing of reference indicators
  • Internal moving parts are PTFE anodized for reduced friction and wear
  • Ergonomic, rugged and lightweight design with comfortable hand grip

The revolutionary PV 411A (4 In 1) multi-function pressure generator is a remarkable new hand pump for generating vacuum, gas and hydraulic pressures from a few mbar up to 700 bar. It replaces four conventional hand pumps and sets the following new standards of performance:

  • Vacuum: to 95%
  • Low pressure (gas): 0.1 mbar resolution
  • Medium pressure (gas): to 60 bar
  • High pressure (hydraulic): to 700 bar
  • Low Pressure (pneumatic)

For sensitive low pressure applications, the GE Druck PV-411-A volume adjuster alone generates 300 mbar to within 0.1 mbar. The stroke restrictor varies the pressure generated and prevents accidental overpressure.

Medium Pressure (pneumatic)

The Druck PV411-A generates gas pressure up to 60 bar, exceeding conventional hand pumps by more than 30 bar. This combined with an improved P/V selector value provides a more controllable release of pneumatic pressure. This extended capability enables many new applications to be addressed.

High Pressure (hydraulic)

The Druck PV/411A solves the problems of priming hydraulic systems; eliminating airlocks and fluid leakage. This is achieved with a unique vacuum priming facility. The volume adjuster is used to quickly and accurately generate pressure up to 700 bar.

DPI 104IS - Digital Pressure Gauge

GE's DPI 104-IS is an intrinsically safe version of the microprocessor-controlled DPI 104-digital pressure gauge. The pressure gauge matches advanced silicon sensor technology with several convenient design features, resulting in an accurate and versatile, yet affordable safe digital test gauge. Supplied as a stand-alone process indicator or in a kit with the widely proven Druck hand pumps, the DPI 104-IS provides a reliable and economic solution for a wide range of pressure sensing applications.


0.05% FS including non-linearity, hysteresis, repeatability and temperature effects from 14°F to122°F (-10°C to 50°C)


Maximum five digit

Burst Pressure

Burst pressure is 2x working pressure (exception,20,000 psi (1400 bar); burst pressure 29,000 psi(2000 bar).

Selectable Pressure Units

kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg


Pressure reading: 5 digits with 0.5 in (12.7 mm character height)

Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height

Display Update: Two times per second

Pressure Bar Graph

In addition to the numeric pressure indication, the GE Druck DPI 104-IS LCD display contains a circular twenty segment bar graph to provide the user with a quick visual estimation of pressure from 0 to 100% full scale output. The bar graph increments represent 5% of the user-selectable range.

Display Update

Two times per second

Minimum/Maximum Values

The minimum and maximum pressure values can be displayed on the DPI 104-IS. This function can be enabled/disabled, and reset by the user.

Switch Test

The GE Druck DPI 104-IS features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω.

Alarm Output

The alarm output consists of an open drain field effect transistor (maximum current 22 mA, maximum voltage 16.9 VDC)

Adjustable Mounting Positions

For added convenience, the GE Druck DPI/104-IS housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility.

Menu Lock

To guard against unauthorized menu access, the GE Druck DPI104-IS features a menu and tare lock function

RS-232 Interface

Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0). Using this link, all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software.

Network Capability

Up to 99 DPI 104-IS instruments can be connected together in a daisy chain-configured network


The DPI 104-IS is supplied with a 9V alkaline battery,type MN1604. Battery life up to four months

Pressure Port

9/16 x 18 UNF male cone connection 15,000 psi (1000 bar) and 20,000 psi (1400 bar) units


Case material: ABS/PC plastic sealed to Type 4/IP65

Wetted parts: All stainless steel (316) or Inconel welded pressure cavity for compatibility with aggressive media.

European Compliance

CE marked

Intrinsically Safe Certification

ATEX: II 1G, EEx ia IIC T4

IECEx: Zone 0, Ex ia IIC T4

cETL (Canada): Ex ia IIC T4, Zone 0

Certification to ATEX, IECEx, CSA standards

SiCalPro Software

This software package allows the user to control the DPI104-IS remotely through a virtual instrument panel onthe computer screen. The calibration data can be logged, viewed and printed in graphical format or as a calibration certificate (safe area only).

System Requirements

Minimum Intel Pentium with Windows® 95 or higher

Write a review

Write a review

Note: HTML is not translated!
    Bad           Good