KIMO MP130 Micro Manometer for Gas Network Leak Testing

KIMO MP130 Micro Manometer for Gas Network Leak Testing

  • Rp.0

The KIMO MP130 can test pressure levels from -200 to +200mbar with selectable pressure measurement units of Kpa, inWg, mbar, mmHg and daPa. Resolution is as low as 0.01mbar (from 0 to 20mbar) and 0.1mbar (from 20 to 200mbar).

This version of the MP130 is supplied with a seal kit which includes stainless steel male and female connectors, two plugs, a tap with 2 valves and 3 channels, a pressurisation pump and different connector types.

KIMO MP130 Micro Manometer for Gas Network Leak Testing Key Features
  • Special manometer specifically designed for gas network leak testing
  • 4.6mm diameter threaded connectors made from nickelled brass
  • Measure pressure in selectable units: Kpa, inWg, mbar, mmHg and daPa
  • Measurement range from -200 to +200mbar
  • Manual self calibration function
  • Hold function temporarily freezes current value shown on the screen
  • Display MAX/MIN values taken over a period of time
  • Configurable automatic shutoff
  • Backlight - ideal for use in darkened areas
  • 180 hour battery life

What's Included?

  • KIMO MP130 Manometer
  • Calibration Certificate
  • Transport Case

Write a review

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Related Products

KIMO MP112 Micro Manometer: -2000 to +2000mbar Range
KIMO MP112 Micro Manometer: -2000 to +2000mbar Range

Test pressure l.....

Rp.0
KIMO MP115 Micro Manometer range -500 to +500mbar
KIMO MP115 Micro Manometer range -500 to +500mbar

The KIMO MP115 .....

Rp.0
KIMO MP111 Micro Manometer range -1000 to +1000mmH20
KIMO MP111 Micro Manometer range -1000 to +1000mmH20

KIMO's MP111 ma.....

Rp.0
KIMO MP110 Micro Manometer range -1000 to 1000Pa Range
KIMO MP110 Micro Manometer range -1000 to 1000Pa Range

The KIMO MP110 .....

Rp.0