TIME TIME1150 Ultrasonic Flaw Detector

TIME1150 Ultrasonic Flaw Detector is a portable, industrial, non-destructive ultrasonic flaw detector, which confirms to EN12668-1 standard, and used to rapidly, and easily inspect work pieces accurately for various defects such as cracks, inclusions and pinhole porosity etc. Further evaluation of these defects can be performed during the testing process. The instrument can be used extensively in many varying fields where materials inspection is required to maintain quality control during manufacturing and production processes, e.g. manufacturing industries, iron & steel industry, metallurgical industry, metalworking, chemical industry, etc. Ultrasonic flaw detectors are also used extensively in the active safety inspection and service-life evaluation of components in such fields as aerospace, railway transportation and boiler pressure vessels, etc. 

Features

Display:

•5.7 inch, VGA color TFT LCD display screen; 

•Simultaneous display A-scan and B-scan waveform; 

•Five different measured values are displayed at the same time; 

•Function such as freeze waveform, peak value, comparative and envelope are available.

•Various colors can be selected and brightness adjustable to meet different environment requirements.

•Language: Chinese, English and Spanish

Transmission: 

•With high performance square wave pulse generator which is adjustable. 

•Pulse amplitude (V):100-400, 10V step adjustable; 

•Pulse width (ns):75,100-500, 50ns step adjustable; 

•Impedance (Ω): 50,100,200,500 adjustable; 

•Pulse repetition frequency (Hz): 10 ~ 1000; 

•Working mode: single crystal probe, double crystal probe, transmission. 

Receiver: 

•Sampling frequency: 80MHz; 

•Rectify mode: positive half wave, negative half wave, full wave, RF; 

•Gain:110dB; 

•Gain step: 0.1, 0.2, 0.5, 1.0, 2.0, 6.0, 12.0 dB; 

•Automatic Gain; 

Gate: 

•Two independent measurement gates; 

•Dual gate operation and measuring; 

•Various gate measurements and alarm functions; 

Alarm: 

•Variety of alarm modes can be selected in sound alarm or light alarm; 

•Gate positive wave alarm, gate negative wave alarm

Data Storage: 

•With functions of save, copy or load the inspection parameters and 50 channels can be stored.

•Remarks can be added to facilitate identify channels. 

•Can store or review the waves of A scan and B scan, 1000 waves can be stored.

•Active Record: store or replay waveform in real time and the waveform is 4×2000 pixel.

•Edit the parameters and displayed with the waveform.

•Thickness storage and review

Detection function: 

•Standard dynamic DAC curve.

•Dynamic AVG curve.

•Two independent gates with various measuring functions.

•Peak value detection: detect the highest wave in real time and record the maximum value of the flaws.

•Flaw location: horizontal location, depth location and beam path location.

•Flaw sizing: AWS D1.1, DAC SL, AVG etc.

•Measuring probe frequency.

•Two point calibration and angle beam calibration.

•Measuring the height of crack..

•With linear reject function, the highest rejection is 80% of the full screen height.

•Calculate φ value: during inspecting the forging workpiece by using straight beam probe, the instrument will identify the highest wave of defects and then calculate φ value automatically.

•Curvate surface correction and Leg display function 

Communication and printing: 

•Printing inspection report by connecting printer via USB interface 

•Support PCL5 and PCL6 printing language and achieve True type front printing.

•Flash disk can be connected to save the parameters and waves.

•Communicate with PC and transfer the parameters, waveforms, Screen and files to PC via USB cable.

Download to PC

Interface: 

•USB OTG interface.

•Power adapter interface.

Others:  

•Lock/unlock system parameters.

•With clock display.