Phenix 46CP50/70-2-10 Hipot Tester

Test set is designed to measure, at commercial power frequencies, the dielectric strength of electrical insulating materials. Mobile AC/DC Test Set with features /outputs described below.
 
INPUT:                      120  / 220 VAC, 15 / 10 A, 1 Phase, 50/60 Hz
OUTPUT:                 0- 50kVAC @ 40 mA | 0-70 kVDC @ 10 mA
 
DUTY CYCLE:  5 Minutes on / 15 Minutes Off at full current
DISTORTION:  Less than 5%
ENVIRONMENT:  Mobile, Indoor /Outdoor in fair weather, Maximum 40°C Ambient
                           
SYSTEM CONFIGURATION:
3 piece design with hand cart.
                                               
DESIGN & SAFETY FEATURES:

• Main power circuit breaker
• Key switch (mushroom type) for CONTROLPOWER / EMERGENCY OFF
• External interlock provision
• Guard/Ground/Return provision
• Post Insulators and HV buss
• ZERO-START interlock and indicator
• Motorized control of output voltage to raise / lower voltage with indicators 
• High Voltage ON / OFF pushbuttons with indicators
• Programmable “Rate of Rise” through the operator interface
• Slow and fast-acting protection on all meters and relays
• Transient Protection for all components
• Instruction manuals complete with schematics and parts list
• DC output negative with respect to ground
• Direct Metering of the Output

 
                           
INSTRUMENTATION:
All metering function has been integrated into a rugged transport box similar to the 6CP series of hipots.
including the following:

• VOLTMETER: 0-70.0kVAC/DC, Accuracy ±(0.8% RDG + 0.2% RNG + LSD)
• CURRENTMETER: Multi –range up to 10 mA, Accuracy ±(0.8% RDG + 0.2% RNG + LSD)
• DWELL TIMER: 0-999.9 Seconds / Minutes / Hours

                           
DIMENSIONS AND WEIGHT:
                        
Controls:              21.25”(540mm) x 16.75”(426mm) x 13.75”(349mm), 61lbs, (28kg)
HV Tank:               14”(356mm) x 14”(356mm) x 17”(432mm), 80lbs (36kg)
Divider / Diode:    9.5”(241mm) x 9.5”(241mm) x 44”(1105mm), 43lbs (20kg)