CheckLine PROBE-FN35 Ferrous & Non-Ferrous Probe(180 mils/3500 microns)

  • ManufacturerCheckline
  • Product Code: PROBE-FN35
  • Availability: Pre-Order

  • Rp0

0 reviews
Write a review

The 3000PRO Series coating thickness gauge is a multifunctional fully menu driven gauge for fast, professional and precise coating thickness measurement for:

  • Paint and electroplated coatings on iron and steel and other ferrous metals (DFN model)
  • Paint and anodizing coatings on non-ferrous metals and on austenitic stainless steels
The user will select one or more probes best suited for their application to connect to the 3000PRO gauge as all the probes are interchangeable and their internal calibration is stored within a small microchip inside the probe connector housing. This provides for quick and easy hot-swapping from one probe to any other in seconds.
Eight (8) separate probes are offered for a wide variety of applications.
 
Features
  • Automatic identification of the substrate
  • Highly wear-resistant measuring poles made of carbide metal
  • Special probes for unusual measurement tasks
  • Safe use even for special applications such as sand-blasted surfaces, small parts and curved surfaces
  • Scan mode for the quick recognition of coating thickness variations on large surfaces, including display of minimum and maximum readings
  • Display backlight for poor ambient lighting conditions
  • Online statistics with all statistical parameters
  • Extensive memory storage for recording of up to 10,000 data pints in up to 500 separate files "batches"
  • Alphanumerical file names can be used to identify each of the separate files "batches"
  • Infrared interface for wireless data transfer to printer and PC or via built-in RS-232
  • Includes FREE software for transferring data to a PC including histogram function
  • Optional high temperature footer for measuring on surfaces up to 150 °C/302 °F
  • Includes NIST-Traceable Calibration Certificate
  • 1 Year Warranty
Available Probes

Standard Probes
Range

 
F0 - 60 mils (0 - 1500 m)
N0 - 60 mils (0 - 1500 m)
FN0 - 60 mils (0 - 1500 m)
90° Wand Probe for measuring hard to reach areas

FN90

0 - 60 mils (0 - 1500 m)

Micro Probe for very thin coatings

FN02

0 - 8 mils (0 - 200 m)

Probes for thick coatings

F35

F: 0 - 140 mils (0 - 3500 m)
N: 0 - 120 mils (0 - 3000 m)

FN35

0 - 140 mils (0 - 3500 m)

F10

0 - 400mils (0 - 10 mm)

"F" Probes measure Coatings on Ferrous Metals
"N" Probes measure Coatings on Non-Ferrous Metals
"FN" Probes measure Coatings on both Ferrous & Non-Ferrous Metals

Specifications:

  • Measuring principle:
    • Magnetic induction method (F-version);
    • Eddy current method (N-version) 
  • Measuring range:
    • 3000PRO & 3000PRO-FN90: 0 - 60.00 mils 0 - 1500 æm
    • 3000PRO-F10: 0 - 400 mils 0 - 10,000 æm  
  • Tolerance: ñ (0.7 æm/0.04 mils + 1% of reading) 
  • Resolution:
    • mil
    • 0.00 - 9.99 mils 0.01 mils
    • 10.00 - 24.98 mils 0.02 mils
    • 25.00 - 49.95 mils 0.05 mils
    • 50.0 - 99.9 mils 0.1 mils
    • Microns (æm)
    • 0.0 - 99.9 æm 0.1 æm
    • 100.0 - 249.8 æm 0.2 æm
    • 250.0 - 499.5 æm 0.5 æm
    • 500 - 999 æm 1 æm
    • 1.000 - 1.998 mm 0.002 mm
  • Display: 4-digit display (digit height 10 mm/0.4?) and 32 alphanumerical characters; switchable backlight 
  • Minimum measurement area: 5 mm x 5mm/0.2? x 0.2? 
  • Minimum curvature radius:
    • convex 2mm/0.08?;
    • concave 5mm/0.2? 
  • Minimum substrate thickness: 0.2mm/8 mils (for F-versions); 50 æm/2 mils (for N-versions) 
  • Calibration methods:
    • Factory calibration: no calibration required for standard applications
    • Zeroing (1-point calibration): measurements on small geometries
    • Zeroing and foil calibration (2-point calibration): increased measuring accuracy
    • Two-foil calibration: especially for rough, sand-blasted surfaces
    • CTC: calibration on coated object if zeroing is not possible
    • Zero offset: addition/subtraction of a constant value to/from the reading 
  • Limit values: Selectable; optical and acoustic signal if limit value is exceeded 
  • Scan mode: For continuous measurements; for the quick recognition of coating thickness variations; with permanent display of minimum and maximum reading 
  • Statistics:
    • Single-value statistics: n, avarage x, s, kvar, min, max, cp, cpk from max. 10,000 readings
    • Block-value statistics: n, avarage x , avarage s, avarage kvar , min, max, cp, cpk; block size 3 to 100 readings 
  • Data memory: 10,000 readings in max. 500 selectable files; alphanumerical file names; stored readings and statistical values individually recallable 
  • Interfaces: Infrared and serial RS232 interface 
  • Language: Operator prompting and documentation in German, English, French (optional other languages) 
  • Operating temperature: 0 øC to 50 øC/32 øF to 122 øF (storage temperature - 20 øC to +60 øC/-4 øF to 140 øF) 
  • Surface temperature:
    • 5ø F - 140ø F / -15ø C - 60ø C (standard)
    • 5ø - 302ø F / 15ø - 150ø C (w/optional footer) 
  • Power supply: 2 x round cell (AA) 1.5 V up to 60 hours of operating time 
  • Housing/keypad: Protection class IP52 (protection against dust and dripping water) 
  • Dimensions: Gauge: 140 mm x 62 mm x 30mm/5.6? x 2.5? x 1.2? (HxWxD)
  • Probe: dia. 14 mm x 83mm/dia. 0.56? x 3.3? 
  • Weight: approx. 200 g/7 oz (gauge including batteries and probe) 
  • Standards: DIN EN ISO, ASTM, BS 
  • Warranty 1 Year 
  • Calibration Certificate Included 

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Tags: Thickness Gauge

  089681783931

  info@indometer.co.id

  DKI Jakarta-Indonesia