Fluke 1742 Three-Phase Power Quality Logger

The Fluke 1742/INTL Three-Phase Power Quality Logger can be used to assess power quality in accordance with the standards EN 50160 and IEEE 519. This instrument is fully compliant with IEC 61000-4-30 Class A Edition 3 and is capable of measuring and recording the following power parameters:

• Voltage
• Current
• Power
• Power Factor
• Frequency
• Energy forward/ reverse
• Peak demand
• THD
• Flicker

Key Features

• Optimised for simple load and energy studies
• Suitable for engineers and technicians working in the UK, US, Europe, Australia, Brazil and China
• Available in three kits that vary in regards to their included iFlex current probes
• Assess power quality in accordance with EN 50160 and IEEE 519 standards
• Compliant with IEC 61000-4-30 Class A Edition 3
• Measures and logs a variety of power parameters
• Voltage
• Current
• Power
• Power Factor
• Frequency
• Energy forward/ reverse
• Peak demand
• THD
• Flicker
• Measure all three voltage and current phases as well as neutral current using three-phase and neutral voltage test leads and up to four flexible current probes (NOT included with the Fluke 1742/B)
• Can perform measurements at any point on the power installation, from the service entrance to the substation to the load
• Troubleshoot and analyse power distribution systems
• Quantify energy usage
• IP65 ports
• IP65 body (when used with an IP65 voltage adapter)
• Highest safety rating in the industry: 600V CAT IV/ 1000V CAT III
• Wide power range: automatically goes from 100V to 500V
• Can be powered by the circuit-under-investigation
• Supplied with a lithium-ion battery capable of providing up to four hours of power
• Can be powered using a wall line cord
• Small dimensions: 23cm x 18cm x 5.4cm
• Suitable for use in tight spaces
• Can be secured using a standard chain or another security instrument
• Supplied with a 2m test lead for accessing awkwardly placed conductors
• Thin, IP65, flexible iFlex current probes (NOT included with the Fluke 1742/B) for accessing tight spaces
• The wide ranges of the iFlex current probes ensure that they can provide a high level of accuracy regardless of the application
• Automatically recognises, scales and powers the connected probes and/or clamps
• Intelligent verification feature automatically checks that probes, clamps and test leads are connected correctly
• The intelligent verification feature digitally corrects faulty connections
• An amber light indicates incorrect connections
• A green light indicates correct connections
• Quick, graphical and guided PC-application setup
• Internal memory
• A number of power parameters are saved automatically to ensure measurement trends are complete
• Transfer data to a PC via a USB, Ethernet or Wi-Fi connection
• Two USB ports
• Download data directly to a USB stick
• View data remotely via a PC and Wi-Fi connection
• Supplied with Fluke Energy Analyse Plus Software
• Create EN 50160, IEEE 519 and GOST 33073 reports using the supplied software
• Alter report templates to accommodate for evolving standards
• Analyse every aspect of the energy consumption and power quality state-of-health using the Fluke Energy Analyse Plus Software
• Select particular parameters to create a customised view and perform advanced data correlation
• View day/day, week/week and hour/hour data comparisons
• Export data in NeQual and PQDIF formats for use with third party software
• An effective diagnostic, inspection and maintenance tool optimised for simple load and energy studies