Fluke 3130-G2M Portable Pneumatic Pressure Calibrator

The Fluke 3130 Portable Pneumatic Pressure Calibrator includes an internal, motorised pump which facilitates its ability to generate vacuum or pressure without the need for hand pumping. The maximum pressure achievable using the internal pump is 2MPa (300 psi, 20 bar) and the maximum vacuum is -80kPa. Should the user find he/she needs to fill larger volumes with pressure; the Fluke 3130 may be used with an external gas supply (up to 2MPa) to generate the desired pressure. Furthermore, all created pressures can be finely adjusted using the variable volume.

As well as generating pressure, the Fluke 3130 can be used to measure pressure up to 2MPa (300 psi, 20 bar) to an accuracy of ±0.025% reading+ 0.01%FS. Alternatively, the Fluke 3130 Portable Pneumatic Pressure Calibrator may be used in conjunction with the Fluke 700P and 750P Pressure Modules in order to improve measurement performance.

Fluke 3130 Portable Pneumatic Pressure Calibrator Key Features

• Calibrate pressure transmitters, transducers and gauges
• Can generate, control and measure pressure
• Can read the output of the instrument-under-investigation
• Internal, motorised pump for generating vacuum or pressure without the need for a hand pump
• Generate pressure from vacuum to 2MPa (300 psi, 20 bar)
• Generate vacuum to -80kPa
• Can be used with an external gas supply (up to 2MPa) to fill larger volumes with pressure
• Variable volume for fine pressure adjustments
• Measure pressure up to 2MPa (300 psi, 20 bar) to an accuracy of ±0.025% + 0.01%FS
• Can be used with Fluke’s 700P and 750P Pressure Modules
• Measure and generate current signals between 4 and 20mA
• Measure voltage between 0 and 30V
• Generate a 24V DC loop power supply for powering transmitters during closed loop calibrations
• Can be used in conjunction with Fluke’s Calibration Compass for Pressure Software (NOT included) to log data and send instructions
• To be used with the above software the calibrator must be connected to a PC using Fluke’s Calibration 700SC Serial Interface Cable Assembly (NOT included)
• Rechargeable, NiMH battery
• Capable of performing approximately 100 calibration cycles at 300 psi (using the internal pump) before battery supply requires charging
• Battery life of approximately 50 hours
• Power or recharge the calibrator using the included universal AC mains adapter
• Built into a robust casing
• The casing includes space for the power supply, test leads and fittings
• Durable, practical, versatile and adaptable

What’s Included?

• Fluke 3130 Portable Pneumatic Pressure Calibrator with Standard Calibration
• US, EUR, UK and China/ Australia Line Cords