Fluke 7526A Precision Process Calibrator

Fluke 7526A Precision Process Calibrator Details

The Fluke 7526A Precision Process Calibrator can be used to calibrate the following components:

• RTD and thermocouple readouts
• Pressure gauges
• Temperature transmitters
• Digital process simulators
• Data loggers
• Multimeters

The Fluke 7526A Precision Process Calibrator is able to calibrate the above modules and instruments as a result of its extensive capabilities.  It is able to simulate and measure nine types of RTDs and thirteen types of thermocouples. In addition to this, it can source between 0 and 100V of DC voltage and is able to measure DC voltage between 0 and 100V to an accuracy of 0.004% of the reading. Furthermore, this instrument can source 0 to 100mA of DC current and can measure DC current between 0 and 50mA to an accuracy of 0.01%. Adding to its sourcing capabilities is its ability to issue a 24V DC loop power supply, whilst its ability to measure 4-20mA loop current extends its measurement capabilities.

As well as the above, the Fluke 7526A Precision Process Calibrator can be used with Fluke’s 700 or 525A-P Pressure Modules in order to measure pressure to within 0.008% of the determined pressure value. The Fluke 7526A Precision Process Calibrator also accepts ITS-90 coefficients allowing it to take accurate SPRT (Standard Platinum Resistance Thermometers) measurements.

This instrument is also compatible with Fluke's MET/CAL® Software (NOT included) which allows the user to monitor measurements and reports, as well as conduct automated calibration procedures.

In addition to conducting automated calibration procedures using the MET/CAL® Software, the Fluke 7526A Precision Process Calibrator also includes an automated switch-test function.

In order to facilitate all the Fluke 7526A Precision Process Calibrator’s measurement capabilities, it includes a number of physical features, including:

• Isolated pressure module input: automatically detects the type and value of the Fluke 700 Pressure Module connected
• DC voltage, current and switch-test input and 24V DC power supply
• Thermocouple input and output terminal
• Two-wire RTD/Ω output terminal
• Four-wire RTD/Ω input terminals
• Isolated input controls: HART key activates a 250Ω loop resistor  facilitating the HART device's ability to read a digital HART signal superimposed onto the 4-20mA loop current
• Primary input and output controls
• Cursor controls

This conveniently designed pressure calibrator is ideal for the benchtop calibration of a variety of temperature and process pressure equipment. The Fluke 7526A Precision Process Calibrator is a versatile, accurate, ergonomic and cost-effective instrument.

Fluke 7526A Precision Process Calibrator Key Features

• Ideal for calibrating a wide variety of temperature and pressure equipment
• Suitable for calibrating RTDs, thermocouple readouts, pressure gauges, temperature transmitters, digital process simulators, data loggers and multimeters
• Simulate and measure 9 types of RTDs
• Simulate and measure 13 types of thermocouples
• Source and measure 0 to 100V DC
• Measure DC voltage to an accuracy of 0.004% of the reading
• Source 0mA to 100mA DC current
• Measure DC current between 0 and 50mA to an accuracy of 0.01%
• Issue 24VDC loop power supply
• Measure 4-20mA loop current
• Use with Fluke’s 700 or 525A-P Pressure Modules to measure pressure to an accuracy of 0.008% of the reading
• Accepts ITS-90 coefficients for accurate SPRT measurements
• Compatible with Fluke’s MET/CAL® Software (NOT included)
• Automated switch-test function
• Isolated pressure module input: automatically detects the type and value of the Fluke 700 Pressure Module connected
• DC voltage, current and switch-test input and 24V DC power supply
• Thermocouple input and output terminal
• Two-wire RTD/Ω output terminal
• Four-wire RTD/Ω input terminals
• Isolated input controls: HART key activates a 250Ω loop resistor  facilitating the HART device's ability to read a digital HART signal superimposed onto the 4-20mA loop current
• Primary input and output controls
• Cursor controls
• Ideal for benchtop calibration
• Versatile, accurate, ergonomic and cost-effective

What’s Included?

• Fluke 7526A Precision Process Calibrator
• Traceable Calibration Report
• User Manual CD
• Getting Started Guide
• Power Cord
• Thermocouple Shorting Jumper
• USB-to-Serial Adapter Cable