Global Water PL200-G Garden Hose Thrd Pressure Logger

The PL200-G Water Pressure Data Loggers are the latest addition to Global Water's line of rugged remote water pressure recording instrumentation.  The Water Pressure Loggers make it easy to verify low water pressure complaints, locate water pressure spikes, and even provide water distribution system modeling data.  The Water Pressure Loggers' large memory buffer will store over 81,000 water pressure readings with user defined intervals from 1 per second to more than 1 per year.  Plus, you can easily capture momentary pressure spikes and dips with the Water Pressure Logger's fast, 10 water pressure samples per second sampling mode.  (Note: Fast recording will reduce battery life.)  The Water Pressure Loggers' programmable start and stop alarm times makes it possible to synchronize multiple water pressure data loggers to start at the same time, delay starting until a preset time, or limit the number of recordings during a day.  With the Water Pressure Data Loggers standard ¾ inch garden hose connection and compact, water resistant enclosure, the PL200-G Water Pressure Data Loggers can record water pressure data just about anywhere you need it.  The Water Pressure Data Loggers operate on two standard 9 volt batteries, which they monitor so you are never caught off guard with dead batteries.  A third onboard lithium battery ensures your water pressure data will be safe in the event you are unable to change the 9V batteries before they fail.

Applications

The PL200-G Water Pressure Data Loggers were designed for applications which require time-stamped water pressure data and an instrument that needs to be portable and rugged.  Water Pressure applications such as checking the water pressure on newly constructed buildings, buildings recently attached to a pre-existing water main, buildings near construction projects working on water systems, checkign the pressure of a new irrigation system, maintaining an existing irrigation system, and many others.

Water Pressure Data Loggers

Pressure Range:  0-200 PSI, 300 PSI overpressure

Accuracy:  + 1.0% FS

Pressure Connection:  Standard ¾ inch garden hose thread

Memory:  Non-volatile flash memory

Power:

   Voltage:  Two 9VDC alkaline batteries standard.  8 VDC Min. to 24.0 VDC Absolute Maximum

   Standby Current:  65uA Typical

   Logging Current:  5mA Typical + sensor current

Sample Modes:  Fixed Interval Programmable from 1 Sec. to >1 Year

   High Speed 10 Samples per second

   Logarithmic Sample Rate (Approximation)

   Exception (Log only on deviation from previous reading)

Storage Capacity: 81,759 recordings, battery voltage monitor, and date/time stamp

Data Overwrite: Select memory wrap or unwrap (unwrap will stop logging data once memory is full)

Communication Ports: USB Type B

Selectable Baud Rates: 9600, 19200, 28800, 38400, 57600, 115200

Clock: Synchronizes to the time and date of user's computer

Operating Temperature: Industrial, -40° to +185°F (-40° to +85°C) (Battery may not apply)

Weight: 0.8 lbs (363 g)

Dimensions (Enclosure): 3-1/8 x 3-1/8 x 2-1/8 inches (7.9 x 7.9 x 5.4 cm)

Datalogger Software

Compatible with Microsoft's Windows 98, ME, 2000, NT, XP, Vista and 7

Windows and Excel are trademarks of the Microsoft Corporation

Tabular Display/Printout

Data in standard spreadsheet format (.CSV)

Programmable alarm start and stop times

Field calibration software and help files included