Omega DPG101 [DPG101-2.0KG] Digital Display Pressure Gauge 2000 psi Gage


  • ManufacturerOmega
  • Product Code: DPG101-2.0KG
  • Availability: Pre-Order

  • Rp0



DPG101 is an electronic digital pressure gauge used to monitor hydraulic fluids. It monitors the pressure via the resistance measured on an isolation membrane. The output signal is amplified by a high-precision, low-temperature drift amplifier. The signal is then fed into a high accuracy A/D converter for the microprocessor to process and then show on the LED display.

This flexible, simple to operate digital pressure gauge is safe, reliable, and easy to maintain. The DPG101 is widely used in hydro-power, water, petroleum, chemical, mechanical, hydraulic, and other industries.

Specifications

Display Units: Gauge can be factory scaled to any engineering unit such as psi, kPa, bar, mbar, inHg, inH2O, mmHg, ftH2O, torr, kg/cm3

Measuring Range: -0.1 to 35 MPa (-14.50 to 5000 psi)

Display Type: 4-digit LED

Accuracy: 0.25% FS for gauge pressure >5psi

±0.5% FS for all others including absolute, compound gauge, and Vacuum ranges

Power: 85 to 265 Vac

Stability: <0.1% FS per year

Case Protection: IP65

Operating Temperature: -30 to 80ºC (-22 to 176ºF)

Operating Humidity: <90%

Media Temperature Limits: -40 to 150ºC (-40 to 302ºF) [equip with cooling element accessory if media temperature is greater than 80ºC (176ºF)]

Overpressure Limits: 3x rated pressure below 60 psi; 2x rated pressure from 100 psi to 1000 psi; 1.5 x rated pressure over 1000 psi

Process Connection: ¼" NPT, others consult Omega

Wetted Parts: 316 SS threads, NBR O-ring

Storage Temperature: -20 to 70ºC (-4 to 160ºF), less than 80% relative humidity

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Digital Display Pressure Gauge