PCE TDS+ 200 SML Handheld Ultrasonic Flow Meter

PCE-TDS 200 S SENSOR

Small sensor pair for pipe diameters DN 15 ... 100 / 20 ... 108 mm. Suitable for particularly small pipes. The sensors have a particularly small dimension of 45 x 30 x 30 mm and a temperature resistance of -30 ... 160 °C. Thanks to the magnets on the underside, the sensors can be mounted on ferrous metals. In addition, the sensors for the ultrasonic flowmeter can be connected to the pipe by means of detachable cable ties. 

PCE-TDS 200 M SENSOR

Medium sensor pair for pipe diameters DN 50 ... 700 / 57 ... 720 mm. Suitable for flow measurement on medium-sized pipes. With the built-in magnets on the sensors for the ultrasonic flow meter, they can be attached to ferrous pipes. Alternatively, the sensors can be mounted to the pipe with detachable cable ties. The temperature resistance is between -30 ... 160 °C.

PCE-TDS 200 L SENSOR

Large sensor pair for pipe diameters DN 300 ... 6000. 6000. This sensor pair is therefore suitable for particularly large pipes. The sensors can be attached to the Clamp-on Ultrasonic Flow Meter with detachable cable ties. Thanks to the built-in magnets, the sensors can be attached to pipes with ferrous metal. The sensors have a dimension of 91 x 52 x 44 mm.

Highlights

- Measuring range ±32 m/s
- USB-C interface for data transfer 
- Optional software for analysing the measured values
- Reproducibility ±0.5 % of measured value 
- Heat quantity measurement
- Data memory for 10 million measuring points
- individually adjustable alarm limits
- optionally with ISO or DAkkS calibration certificate

Delivery Scope

1 x Ultrasonic flow meter PCE-TDS+ 200 SML
1 x Flow sensors PCE-TDS 200 S SENSOR (pair)
1 x flow sensors PCE-TDS 200 M SENSOR (pair)
1 x flow sensors PCE-TDS 200 L SENSOR (pair)
2 x 5 m connection cable 
2 x detachable cable ties
1 x power supply unit
1 x USB-C cable
1 x ultrasonic contact gel 
1 x PCE measuring tape
1 x plastic case
1 x instruction manual