PCE WSAC 50W 230 Wind Speed Alarm Controller

PCE-WSAC 50W 230 Wind Speed Alarm Controller Radio anemometer warning system / Wind monitoring on construction cranes / 4 ... 20-mA analog output / Power supply 110 ... 230V AC

Wind speed alarm controller PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The wind speed alarm controller PCE-WSAC 50W 230 is equipped with alarm relay for a pre-alarm or main alarm. 

Due to the high measuring range of up to 50 m / s of the wind speed alarm controller, stormy gusts can also be monitored. The radio range of the wind speed alarm controller is in the open field up to 750 m / 2500 ft in the free frequency band of 2.4 GHz. When installing the display of the wind speed alarm controller PCE-WSAC 50W 230 in buildings, a range of up to 60 m / 200 ft can be achieved for the wind sensor. Due to the integrated 4 ... 20-mA analogue output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.

- Robust plastic housing

- Units: km / h, mph, m / s

- 4 ... 20-mA analog output

- 128 x 64 pixel LC display

- Alarm relay

- Measuring range up to 180 km / h

- Durable stainless steel ball bearings

- Ambient temperature -20 ... 70°C / -4 ... 158°F 

- Radio transmission