PIE 830 High Accuracy Multifunction Diagnostic Calibrator with Dual Display

PIE 830 - High Accuracy Multifunction Diagnostic Process Calibrator with Dual Display

• Checkout flow & vibration systems
• To 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz & 20.000 kHz.
• Measure pressure with optional pressure modules
• 32 modules for gauge, differential, absolute & compound pressure
• Easy to read
• Turn on the backlight & easily see the display in dark areas of the plant

The PIE Model 830 is more than a multifunction calibrator. It is also a loop detective that is able to diagnose common problems that other test equipment just can not find. Have a flooded junction box or unknown ground faults? Our Loop Diagnostic technology will detect it. Or use the LoopScope to see at a glance all the parameters - milliamps, voltage and resistance - in the loop.

Stop throwing away perfectly good transmitters only to find the problem is somewhere else in the loop. Setup the PIE Model 830 as an isolated universal transmitter and turn on the Loop Diagnostics. The display will tell you EXACTLY the sensor input, the current output and if there is any uncontrolled current in the loop due to a ground fault, corrosion bridge or moisture. If the control system sees no problem when the 830 is acting as a transmitter THEN you can replace the faulty transmitter. With RTDs the 830 automatically detects which of the 2, 3 or 4 wires are connected and unbroken quickly alerting you to a sensor problem.