Sika C2 Digital Pressure Gauge with Datalogging

The Sika C2 Digital Pressure Gauge with Datalogging is a combined pressure measuring instrument and datalogger. It is an upgraded version of the Sika C2 Digital Pressure Gauge and includes a new µcontroller, larger internal memory and more space for future enhancements.

The Sika C2 Digital Pressure Gauge with Datalogging is suitable for performing stationary and mobile pressure measurements as well as calibrating, checking and adjusting other pressure measuring instruments. The Sika C2 Digital Pressure Gauge with Datalogging is available in ten models that vary in regards to their pressure ranges. Please see the table below for further details.

Applications
The Sika C2 Datalogging Digital Pressure Gauge has a wide scope-for-use:

Calibrating pressure measuring instruments (the C2 functions as a reference pressure gauge)
Continuous monitoring of system pressure
Intermittent checking of system pressure
Measuring the air density of building shells
Checking the condition of filters in ventilation and air conditioning systems
Determining the leakage rate during leakage tests by measuring pressure drops
Measuring barometric air pressure to ascertain weather conditions
The Sika C2 Digital Pressure Gauge with Datalogging is an ergonomic, easy-to-use and accurate pressure gauge and datalogger.

Sika C2 Digital Pressure Gauge with Datalogging Key Features

A combined pressure measuring instrument and datalogger
NEW µcontroller
Larger internal memory and more space for future upgrades than Sika’s original C2
Suitable for stationary and mobile pressure measurements
Calibrate, check and adjust other pressure measuring instruments
Ten models that vary in regards to their ranges
Log up to ten data files
Each data file contains the measurement time and minimum, maximum and actual values
Measurements are saved as a CSV file
Delete unwanted results directly via the gauge
Dynamically compresses data
Start/ Stop button for commencing and halting datalogging
Measure and log pressure over the duration of twenty-four hours
‘Rec’ symbol is indicated on the display during datalogging
Download data to a PC via a USB interface
Data is downloaded in a CSV file
Windows driver is not required
Data can be viewed using Windows software
Update the internal software via a USB connection
Can be powered via the USB port
Large, illuminated, digital display
Digital readout prevents parallax errors and prevents misreadings caused by needle jitters
Six selectable pressure units: bar, mH2O, PSI, mbar, kPa and MPa
Tare/ Zero function with selectable zero-point
Tare/ Zero function prevents tedious mechanical adjustments
Tare/ Zero function enables easy offset adjustment and single-point adjustment
Min/ Max Display function
Peak function: determine the peak value
Peak function is useful for identifying erroneous results and measurements outside of limits
Powered by long-life, rechargeable/ single-use batteries
Battery life: up to 1500 hours
Programmable Auto-Off function
Electronics with extremely low power consumption
Fitted with a protective rubber cap
Rugged, impact-resistant, IP67-rated design
Calibrate pressure measuring instruments (the C2 functions as a reference pressure gauge)
Continuously monitor system pressure
Intermittently check system pressure
Measure the air density of building shells
Check the condition of filters in ventilation and air conditioning systems
Determine the leakage rate during leakage tests by measuring pressure drops
Measure barometric air pressure to ascertain weather conditions
Ergonomic, easy-to-use and accurate pressure gauge and datalogger

What’s Included?

Your Choice of Sika C2 Digital Pressure Gauge with Datalogging
Operating Manual