Sonel MZC-306 Loop Impedance Meter

The Sonel MZC-306 Loop Impedance Meter can measure fault loop impedance to a resolution of 0.01Ω and can determine low-current impedance measurements in circuits protected by RCD ≥30mA (100 to 440V). In addition to this, the Sonel MZC-306 Loop Impedance Meter delivers the following:

Voltage measurements up to 750V AC (up to 250V with a resolution of 0.1V)
Calculation of fault current
Measurements with swapped L and N conductors
Measurements of resistance (RS) and reactance (XS) components
Automatic differentiation between phase and phase-to-phase voltage
Checking the connection of PE terminals using a contact electrode
1.2m, 5m, 10m and 20m test leads or a power network plug adapter can be connected to the Sonel MZC-306 Loop Impedance Meter. Up to 990 readings can be saved to the Sonel MZC-306 Loop Impedance Meter’s integrated memory. Stored data can be transferred via a USB interface.

Support for a wide range of operating voltages (100V to 750V) means the Sonel MZC-306 Loop Impedance Meter can be used to determine measurements for an array of network types. This makes the Sonel MZC-306 Loop Impedance Meter suitable for use in homes, public buildings and facilities, and small workshops and factories. The Sonel MZC-306 Loop Impedance Meter also has an operating frequency of 45 to 65Hz.  

The Sonel MZC-306 Loop Impedance Meter is a versatile, lightweight and professional fault loop meter.

Sonel MZC-306 Loop Impedance Meter Key Features

• A tester primarily designed to measure fault loop impedance, as well as other electrical parameters
• Measure fault loop impedance to a resolution of 0.01Ω
• Determine low-current impedance measurements in circuits protected by RCD ≥ 30mA (100 to 440V)
• Voltage measurements up to 750V AC (up to 250V with a resolution of 0.1V)
• Calculation of fault current
• Measurements with swapped L and N conductors
• Measurements of resistance (RS) and reactance (XS) components
• Automatic differentiation between phase and phase-to-phase voltage
• Check the connection of PE terminals using a contact electrode
• Connect 1.2m, 5m, 10m or 20m test leads
• Connect a power network plug adapter
• Save up to 990 readings to the integrated memory
• Transfer data via a USB interface
• Wide operating voltage range: 100V to 750V
• Suitable for use with an array of network types
• Suitable for measuring networks in homes, public buildings and facilities, and small workshops and factories
• Operating frequency range: 45 to 65Hz
• A versatile, lightweight and professional fault loop meter

What’s Included?

• Sonel MZC-306 Loop Impedance Meter
• WS-05 Adapter with UNI-SCHUKO Angular Plug
• 1x Crocodile Clip, 1kV 20A
• M1 Hanging Straps
• NiMH Battery, 4.8V 4.2Ah
• USB Cable
• 3x Pin Probe, 1kV, Banana Socket (Red, Blue and Yellow)
• 2x Pin Probe, 5kV, Banana Socket (Red and Black)
• L1 Hanging Straps
• Mains Power Cable
• 3x 1.2m Test Leads, Banana Plugs (Red, Blue and Yellow)
• 1x 0.7m Test Lead, Banana Plugs (Black)
• L4 Carrying Case
• Z7 Power Supply Adapter