DAKOTA RX8-DL SONIC TESTER


  • ManufacturerDakota NDT
  • Product Code: RX8-DL
  • Availability: Pre-Order

  • Rp0



The Dakota RX8-DL Sonic Tester is most commonly used to measure the thickness of cylinder walls, head ports, decks, chassis tubing, body panels, and windshields. The time-based B-Scan feature of the Dakota RX8-DL Sonic Tester displays a cross section view to see the profile/contour of the back surface while scanning cylinders.

Product Features

Dakota RX8-DL Sonic Tester

Model RX8-DL
Display Mode  
Material thickness digits display  
B-Scan cross sectional display  
Combined B-Scan and digits display  
Coating Thickness Display  
Scan Bar Display  
Measurement Range

PE: 0.63 - 914.4mm (0.025 - 36")
EE: 2.54 - 101.6mm (0.100 - 4.0”)

Resolution

0.01mm (0.001”)

Velocity Range

305 - 18,542m/s (0.0120 - 0.7300in/μs)

Additional Features  
High Speed Scan

10 - 200 readings per second

Pulser

150 volt square wave pulser

Gain

Manual or automatic gain control (AGC) with 50dB range

Timing

Precision temperature controlled crystal oscillator (TCXO) timing with single shot 100MHz 8bit ultra-low power digitizer

Memory and Data Logging

Grid (alpha numeric)
Engine Map (cylinder scans)Screen Capture: Bitmap graphic capture for quick documentation (.tif )
OBSTRUCT to indicate inaccessible locations

Calibration Options  
1 - point  
2 - point  
Material selection  
Velocity (speed of sound)  
Transducer Probe Type

Dual Element

Transducer Frequency Range

1 - 10MHz

V-path / dual path error correction

Automatic

Probe Zero

Manual (via integrated probe disk)

Display

1/8in VGA grayscale display (240 x 160 pixels);
viewable area 2.4 x 1.8in (62 x 5.7mm)

Units (selectable)

mm or inches

LED Backlight

on/off/auto

Repeatability / Stability Indicator  

Technical Specification

Dakota RX8-DL Sonic Tester

Part Number Description Certificate
Z-158-0004 Dakota RX8-DL Sonic Tester (PR-8V)  
Operating Temperature -10 to 60ºC (14 to 140ºF)
Power Supply 3 x AA batteries and via USB
Battery Life Alkaline – 35 hrs, Nicad – 10 hrs and NI-MH – 35 hrs
Gauge Weight 383g (13.5oz) - including batteries
Gauge Dimensions 63.5 x 165 x 31.5mm (2.5 x 6.5 x 1.24”)
Packing List Unit, Standard Transducer, Couplant, Manual, Plastic Carrying Case and AA Batteries. PC Engine Mapping Software and Transfer Cable

Write a review

Note: HTML is not translated!
    Bad           Good