Lignomat mini-Ligno DX/C Moisture Meter with Electrode E12 Package D2-M

Package D2-M
  
Applications
Used for moisture control throughout the manufacturing process, from drying lumber to checking the finished wood product. Floor installers and inspectors use the mini-Ligno DX/C with depth electrode to measure wood floors and subfloors without removing floor planks. In the restoration industry structural components can be measured up to 2″ deep behind wall coverings..

Used when the integral pins of the mini-Ligno DX/C are not reaching deep enough. In addition, pin insertion is easier with the slide hammer, than pushing the meter pins into wood, especially when measuring hard wood.

Advantages
The mini-Ligno DX/C is the most advanced mini-Ligno moisture meter with a wide measuring range and correction settings for domestic and tropical wood species, bamboo, drywall and building materials.

Adding the Electrode E12 with insulated pins allows accurate measurements at a defined depth from surface to 2″ deep.

Included
mini-Ligno DX/C
Electrode E12
mini-BNC Cable
Case M