Lignomat mini-Ligno DX/C Pin Meter with Electrode E12 and E14-m Package D24-M

Package D24-M
  
Applications

Used by floor inspectors, contractors and water restoration specialists, anyone who needs to investigate moisture conditions in wood floors, sub floors, panel products, drywall, roofing materials and structural elements in buildings. With these 2 electrodes you can choose the right measuring tool for the job on-hand. Measuring wood with depth electrode E12 and using the E14-m for all other applications,

When the integral pins of the mini-Ligno DX/C are not reaching the areas to be measured, or the material is too hard for the pins to be pushed in by hand.

Advantages

The mini-Ligno DX/C is the most advanced mini-Ligno moisture meter with a wide measuring range from dry (about 5%) to wet (about 65%) and correction settings for domestic and tropical wood species, bamboo, drywall and building materials. 

Using the electrode E12 allows accurate measurements up to 2” deep in wood with insulated pins. Using the electrode E14-m allows measurements up to 7″ in drywall, wall boards and other materials, in areas which would be hard to reach without the E14-m.

Included
mini-Ligno DX/C
Electrode E12
Electrode E14-m
mini-BNC Cable
Case M