Lignomat Mini-Ligno S/DC Moisture Meter with Electrode E12 Package S2-M

Applications
Depth measurements: When moisture hidden behind the surface need to be tracked. For wood, wood-based panels and soft building materials in flooring, inspection, construction, maintenance and restoration applications. With insulated pins, dry material can be measured even behind a wet surface.

Used when the integral pins of the mini-Ligno S/DC are not reaching deep enough to diagnose the full extend of a moisture problem: To determine the depth of moisture infiltration in roofs, attics, crawl spaces, etc. To reach sub floors without removing floor planks and to measure structural lumber behind drywall and other wall coverings.

Advantages
The mini-Ligno S/DC moisture meter measures soft wood, hard wood and panel products, gypsum, drywall, wall boards and other building materials including concrete.

Using the Electrode E12 allows pin pointing moisture distribution from the surface to 2″ deep.  Teflon coated pins measure only at the tip. Slide hammer allows inserting and removing pins easily.

Included
mini-Ligno S/DC
Electrode E12
mini-BNC Cable
Case M