Phase II SRG-2000 Pocket-Sized Portable Surface Roughness Tester Profilometer

The Phase II SRG2000 Pocket-Sized Portable Surface Roughness Tester Profilometer is a pocket-sized instrument for measuring surface roughness texture, conforming to traceable standards. The SRG-2000 can be used on the shop floor in any position, horizontal, vertical or anywhere in between.

The Phase II SRG-2000 has a large LCD display that shows surface roughness parameter Ra, Rz, Rms(Rq) and Rt at the touch of a button, combined with the selected cutoff length. External calibration of the surface roughness values is possible by means of a special CAL button, which makes adjustment of this instrument very easy. A beep signal informs the user about each individual measurement status when ready.

The Phase II Plus SRG-2000 determines surface roughness parameters within a wide measuring range. The piezo-electric pick-up stylus with diamond tip assures a very reliable measurement within tolerances that conform to ASME B46.1. Surface Roughness parameter Ra is computed to conform to ISO and Rz is computed to conform to DIN.

The Phase II SRG-2000 operates on various surfaces, not only flat but also outer cylinder, outer cone, grooves, and recesses greater than 80x 30mm. The areas of application are wide spread. The SRG-2000 is suitable for inspection departments, quality control, on the shop floor during machining, during assembly, and on site.

Product Features:

• Surface roughness parameter: Ra (ISO), Rz (DIN), Rq(RMS), Rt
• Measuring range Ra: 0.05-10.0um
• Measuring range Rz: 0.1-50mm
• Measuring range Rq: 0.05 to 10.0um
• Measuring range Rt: 0.1 to 50um
• Resolution: 0.01um
• Cut-off lengths: 0.0009 in., 0.03 in., 0.09 in.
• Filter: RC analogue
• Tracing length: 0.23 in. (6mm)
• Tracing speed: 0.04 in./second (1.0mm/second)
• Accuracy: +/- 12% of actual value
• Pick-up stylus: Piezo-electric
• Tracer tip: Diamond, radius 5um
• Operating temperature: 32 ° to 104 °F
• Power: 3.6V / 2x NiMh batteries
• Charger: 9V DC
• Contact force on probe: < 1.8ozf (< 50gf)
• Static measuring force of sensor stylus: < 0.06ozf (< 1.6gf)
• Determines surface roughness parameters Ra,Rz, Rms(Rq) and Rt within wide measuring range
• Piezo-electric pick-up stylus with diamond tip assures very reliable measurement within tolerances that conform to ASME B46.1
• Surface roughness parameter Ra is computed to conform to ISO and
• Surface roughness parameter Rz is computed to conform to DIN
• Pocket-sized
• It can be used on the shop floor in any position, horizontal, vertical or anywhere in between
• Large LCD display shows either surface roughness parameter Ra, Rz, Rms(Rq) and Rt, combined with selected cutoff length
• External calibration of surface roughness values is possible by means of special CAL button, which makes adjustments easy
• Beep signal informs user about when each, individual measurement is ready
• Operates on various surfaces, including flat, outer cylinder, outer cone, grooves, and recesses greater than 80x 30mm

Applications

• Inspection departments
• Quality control
• Shop floor during machining
• During assembly in field